You are here: Home » News » Industry News » How is the printed circuit board assembled?

How is the printed circuit board assembled?

Views: 40     Author: Site Editor     Publish Time: 2021-10-13      Origin: Site

This is not easy to make a circuit board. Some gadget enthusiasts like to design and create their own printed boards, but they don't like the finished product of the machine. In addition, it takes a lot of time to make a large number of panels at home. Let us know that gives you a better idea during the board assembly process, how the device creates the details.

As long as you fused to the electronic device of the printed circuit board, pcb assembly is prepared. However, it is manufactured compared to different assembly. With the production of printed circuit boards, several steps include design printed circuit boards, in the printed circuit board.

This is very important to collect all the correct devices and installed on the blackboard and insert an electronic device. The problem now appears is what kind of printed circuit board is installed in. Different electronic panels include different components, depending on the device to be installed. There are two main types of manufacturing methods involved in the production of printed circuit board assembly:

1) Method by passing by the hole: In this method, the device is implanted into the hole

2) Surface mounting method: In this method, the outer plane of the electronic circuit board mounted on the device.

The only identical method between the printed circuit board is mounted with the help of the printed circuit board and the metal solder, by using electricity. How to make the board's capacity determination device must be fused on a blackboard. In the case where more board components are manufactured, it is always best to take advantage of the machine. The circuit is placed on the machine is through the wave welding and by using a reflow. Place the bulk wave welding or reflow furnace. In small-scale production, people can always choose hand-welded.

Sometimes two holes are applied to a single component through methods and surface mounting methods, because some electronic components can only be set in holes, while others can only get surface mount packages. The method is that it is proven to be advantageous when used during assembly.

Installing holes, through powerful electronic components, in case, they have certain physical damage. However, this is a better way to use surface mount, when you know that it is less likely to happen any damage. Surface mounting methods utilize less area of electronic boards.

As long as the pcb assembly process, it is important to check if the motherboard is working properly and performs the required function. In the case of a fault on a portion of the printed circuit board, this is easy to find out the problem and replacement source can be done.






Dongguan Otoma Industrial Co., Ltd. was established in March 2008 with a registered capital of USD 2 million, a 
plant area of ​​more than 12,000 square meters, and more than 500 employees.
Friendship links :One-Stop Manufacturing Solutions(Metal and EVA foam components)
Giant(HongKong)Tech Co.,Ltd   All rights reserved     Technical Support:Molan